N5 vegetable oil methanol electrospray burner one-button start to adjust the firepower size controller

Description

N5/N5K/N5F/N5B Controller function description V3.0 and above 1. Function introduction

This controller is an integral plastic case moisture-proof structure, with its own lead wire, fan control, igniter control, electric

Magnetic pump control, 5-speed firepower and fine-tuning stepless firepower adjustment, multiple start-stop controls are convenient and flexible, and each parameter can be Custom settings. .

Model description: N5 is a general type: N5B Adds the front valve of the pump to the general basis: N5K, in the general type

Add external connection, pressure cooker flame off/pressure cooker on fire/foot switch/quick start-stop switch, etc. functions can be followed according to

Need to set Eod; N5F adds an infrared anti-aircraft burning pan automatic flameout function on a general basis. 2. Technical parameters Power input: AC220V Fan output: AC220V <500W Electromagnetic pump output: AC220V <150W Ignition output: AC220V <150W

Solenoid valve output: AC220V <100W NSB model only Three, lead wire description See the label on the product lead-out line. Four, setting instructions

Long press the set button to enter the setting, turn the knob to select the menu item that needs to be set, and short again

Press the set key to display the menu value, and you can turn the knob to add or subtract and modify it. After confirming, you must long press

Hold the Settings button until SAU appears on the display to save successfully. There is no operation for a few seconds or press Enable/

Stop the system exits the setting state, and the system still runs according to the original parameters. Setting parameter table: N5/N5K/N5F/N5B. Controller function description V3.0 and above. Code Description Default|Adjustment range Remarks value Encircle d-11 gear oil size 30

0-100 This is the lower limit of the minimum adjustment of the knob d-22 gear oil size 35 0-100 d-3| 3 gear oil volume size 40 0-100 d-4 4 gear oil volume 50 0-100 d-5 5 gear oil volume size 60

0-100 This is the upper limit of the maximum adjustment of the knob oPP|Start default gear 1-5 0: Turn off this function.

1: The knob is turned on and off. Start the burning state left

It can be closed when rotated to the minimum, and the closed state is right Knob or rocker start and stop SoP 0-3 | Spin to start

2: The joystick is turned on and off. In the starting combustion state

It can be shaken to the minimum with the joystick, and then it can be shaken off.

The combustion can be started by turning off and shaking in the direction. 3: The knob and rocker are turned on and off. odH|Ignition duration 12 seconds | 3-60 seconds SEP|Knob step value

1.0 0.1-3.0 The minimum step per rotation of the knob tdP|knob to supplement ignition 0-1

Whether to turn the knob to supplement the ignition 0: Start by pressing the oPP setting gear. LAS Start-stop mode 0-1

1: Start according to the size before turning off the fire last time. FoN Pre-cleaning or delayed opening -99-999 0: Indicates that this function is off. -3

Negative value -XX: indicates that the fan is turned on delayed. Fan function second

Positive value XX: means the fan is turned on in advance. 0-999 seconds

0: Indicates that there is no post-cleaning function. FoF After cleaning function XX: means in seconds 0-99 minutes XX-: Represents in minutes.

In the parameter setting state, press the knob to switch the minimum order Digits, seconds and minutes, new in version 3.4 odb Pump delay opening time 0 seconds 0-20 seconds When the knob is pressed to turn off the fire 0: Do not turn off the fan boF 0-1 Whether to turn off the fan 1: Turn off the fan 0: off LcK | Start lock function 0-1 1: enable add this feature in version 3.3 Only models with K. X or F have this function F

The model only has the anti-aircraft burn function enabled or disabled 0: No external switch function.

1: The switch is on and burns, and the switch is off.

2: The switch is off and burning, and on and off the fire. Eod External start-stop switch module 0-6

3: The switch is turned on and burns, and the switch is turned off; there is fast formula

Press or shoot twice to temporarily turn off the fire function.

4: Switch off burning, switch on and off; there is fast

Press or shoot twice to temporarily turn off the fire function. 5: Foot switch, self-locking type. 6: Foot switch, reset type or jog button. EdF Turn off the flame delay

0-5.0 seconds Only models with K. X or F have this function Only models with K, X or F have this function

0: The external switch does not burn and turn off before and after Sweep the wind without turning off the fan. ESt Button start-stop mode 0-1

1: The external switch burns and extinguishes through sweeping wind

Same function as pressing the start-stop button, these functions are connected

Often used in external passive temperature control switch Heater etc. bd1

Anti-aircraft burning or pressure cooker extinguished 0-1 Only models with K, X or F have this function Fire or keep the small fire 0: Turn off the flame.

1: Keep a low fire in the first gear. ESt needs to be set to 0 Five, user operation instructions

Power-on standby displays oFF, press the knob to start and stop the combustion or press the

Start/Stop button starts and stops burning or closes burning, and adjust the firepower through the knob or the setting key.

After turning off the fire, if the post-cleaning time is set, the fan will be turned off according to the time set by FoF.

6. Operation instructions for restoring factory values

The controller will be powered off for about 1 minute, press and hold the set button and turn on the power until

RBc is displayed. At this time, release the set button and press and hold the set button again until SAU is displayed The factory reset operation was successful. Seven, display work status code description

EoF: Indicates that the external pressure cooker switch is off. Only NSK or N5X models will be displayed

HoD: Indicates that the external pressure cooker switch is pressed twice quickly to enter the temporary flameout state, and then press the cooker switch again

Lifted. It is convenient to pour dishes temporarily and easy to operate. Only N5K or N5X models will be displayed

IoF: Indicate infrared anti-aircraft burning control flameout only NSF model will display. 8. LcK start lock function description

This function was added after version 3.3 to prevent accidental activation caused by accidental touch. At the factory

The default is off. If you need this function, you need to find the menu Lck in the settings and set it to 1; enable

To stop the operation method, you need to press the start-stop button on the panel to display oN and press the knob within 3 seconds.

Start, otherwise it will exit automatically and cannot be started.